cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant
Participant
255 Views
Registered: ‎03-25-2020

Video Timing Controller not generating output

Jump to solution

Hi Team,

I Tried to generate Hsync and Vsync as per the image frame 640x480. but while simulating the hardware design, Video timing controller not generating the output. what to do to simulate the block design and to see output as per the clock.

I provide the clock and reset signal only, What to do o generate the output.

tmi.PNG

as per this design only i made the block design. is it possible to generate Hsync and Vsync by using this design.

Please help immediately, what is wrong with the design, i made the required configuration. but not working.

With Regards,

Ratheesh

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Voyager
Voyager
246 Views
Registered: ‎08-02-2019

Re: Video Timing Controller not generating output

Jump to solution

Hi @Ratheesh ,

Did you call "Generate Output Products" by right clicking your design on sources tree?

Saban

 

<--- If reply is helpful, please feel free to give Kudos, and close if it answers your question --->

View solution in original post

1 Reply
Highlighted
Voyager
Voyager
247 Views
Registered: ‎08-02-2019

Re: Video Timing Controller not generating output

Jump to solution

Hi @Ratheesh ,

Did you call "Generate Output Products" by right clicking your design on sources tree?

Saban

 

<--- If reply is helpful, please feel free to give Kudos, and close if it answers your question --->

View solution in original post