UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
231 Views
Registered: ‎09-06-2018

Vivado Hardware ILA-no waveform

board: zcu102
tools: Vivado2018.2
problems:
            My design works under 16MHz clock, at this time, I can get the expected data from the serial port, but I can't see any waveform on Hardware ILA.
If I set the clock to 100MHz, then i can see the waveform.  Whether the clock is directly from PS or through the clock wizard,get the same phenomenon.design_1.pngila-wave.png

0 Kudos
3 Replies
Moderator
Moderator
171 Views
Registered: ‎11-09-2015

Re: Vivado Hardware ILA-no waveform

Hi liu2015@ 

This is probably because yoy forgot to set a trigger + run the ILA. This is something I discuss in my Video Series 31 – Debugging a Video System using an ILA . Refer to the lab3 part.

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
Highlighted
Contributor
Contributor
150 Views
Registered: ‎09-06-2018

Re: Vivado Hardware ILA-no waveform

Hi, Florent
Thanks for reply.
I set a trigger and run the ILA, it doesn't work. I guess it's something about free of clock.
0 Kudos
Moderator
Moderator
130 Views
Registered: ‎11-09-2015

Re: Vivado Hardware ILA-no waveform

Hi liu2015@ 

What trigger did you set? Are you sure you armed the ILA (to start triggering)?

On your screeshot the ILA is IDLE which means that the ILA was not armed.

You need to click on run to arm the ILA:

17.jpg

What do you get if you click on run immediate trigger button14.jpg?

This is all explained in my video series, I hope you read it


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos