cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
700 Views
Registered: ‎08-28-2019

WARNING: [Labtools 27-3403] Dropping logic core with cellname:'u_ila_0' from probes file, since it cannot be found on the programmed device

Jump to solution

I added some debug core to capture the signal and I can see the core 'u_ila_0' was generated in IMPLEMENTATION. But when I click Generate Bitstream.  The core 'u_ila_0'  was dropped and the Tcl Console returned :

WARNING: [Labtools 27-3403] Dropping logic core with cellname:'u_ila_0' from probes file, since it cannot be found on the programmed device.

How can I solve this?

THANKS!

0 Kudos
1 Solution

Accepted Solutions
Highlighted
646 Views
Registered: ‎08-28-2019

I finally solved the problem. The reason I got the warning is that the frequency of Jtag is higher than the clock of debug core. So I solved it by changing the frequency of Jtag to lower.

View solution in original post

1 Reply
Highlighted
647 Views
Registered: ‎08-28-2019

I finally solved the problem. The reason I got the warning is that the frequency of Jtag is higher than the clock of debug core. So I solved it by changing the frequency of Jtag to lower.

View solution in original post