UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer chienpingwong
Observer
3,411 Views
Registered: ‎06-30-2011

can Chipscope automatically "Run" after loading bit file

Usually when using Chipscope, we need to press "Run" botton to trigger whole procedure. But what if the condition I want to see  is immediate right after FPGA boots up. Then for this reason, I need to ask if there is any setting can automatically trigger chipscope to run after loading bit file into FPGA. Thanks you.

 

 

 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
3,399 Views
Registered: ‎03-18-2008

Re: can Chipscope automatically "Run" after loading bit file

Yes. We have this feature in Spartan-6, Virtex-6 and newer devices. It is called the startup trigger. To learn how to use this feature, please look at the ChipScope users guide:
http://www.xilinx.com/support/documentation/sw_manuals/xilinx13_4/chipscope_pro_sw_cores_ug029.pdf

Please refer to the "Startup Trigger Run Mode" on pg 75.
0 Kudos