cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,198 Views
Registered: ‎08-30-2017

data transfer between VC 707 and PC (MatLab)

I am using VC 707 xilinx board. I need to transfer some data from Desktop (Matlab) to The FPGA board and vice versa. what will be the easiest way as i am a beginer. i prefer to use MatIab on desktop as my present  programs arein MatLab. I tried Rs 232, but could not find a rs 232 port on VC 707. Some help please

Tags (3)
0 Kudos
1 Reply
hpoetzl
Voyager
Voyager
1,171 Views
Registered: ‎06-24-2013

Hey @venkatesh_xilinx,

 

I tried Rs 232, but could not find a rs 232 port on VC 707 ...

There is a serial to USB chip (CP2103) on the board which you can connect to via J17.

The serial data will go to bank 13, pins AU36 (RX), AU33 (TX), AU32 (RTS) and AU34(CTS).

 

Hope this helps,

Herbert

-------------- Yes, I do this for fun!
0 Kudos