UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
7,496 Views
Registered: ‎03-13-2012

seeing words instead of bits in in chipscope analyzers

Jump to solution

hi all,

is it possible to see the data in form of words on chipscope analyzer?(note that I have 16 and 64- bit data)

 

I have tried but what I get is only the bits which I have to translate myself if I need to make them into words which is very hectic and time consuming...

I mean what i get is like the result below images...althought they both are 4 bit data words.

listing.JPG

wave.JPG

 

any alternate idea?

0 Kudos
1 Solution

Accepted Solutions
Scholar markcurry
Scholar
13,058 Views
Registered: ‎09-16-2009

Re: seeing words instead of bits in in chipscope analyzers

Jump to solution

 

Over in the Signals Pane on the left side: Select Data Port.  Select your group of signals.  Right click -> Move to Bus -> New Bus.  Then name your bus as you wish. 

 

In the other panes, you can switch your bus-radix to hex, decimal, etc...

 

Regards,

 

Mark

 

 

View solution in original post

1 Reply
Scholar markcurry
Scholar
13,059 Views
Registered: ‎09-16-2009

Re: seeing words instead of bits in in chipscope analyzers

Jump to solution

 

Over in the Signals Pane on the left side: Select Data Port.  Select your group of signals.  Right click -> Move to Bus -> New Bus.  Then name your bus as you wish. 

 

In the other panes, you can switch your bus-radix to hex, decimal, etc...

 

Regards,

 

Mark

 

 

View solution in original post