UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
2,277 Views
Registered: ‎07-25-2016

error in generating the m_axi interface

Hi there, 

I am creating an m_axi interface for my design which gives out 2d matrix as output. 

It will take 2 parameters cos_in and sin_in which i have assigned to s_axilite interface.

 

I am able to c-simulate and synthesize the design but when i perform c/RTL cosimulation it reports "Fail".

but without the interface its reporting "Pass".

 

what is wrong with my interface.

(In my design i am using fixed-point data types )

report.PNG
maxi.PNG
0 Kudos
1 Reply
Scholar xilinxacct
Scholar
66 Views
Registered: ‎10-23-2018

Re: error in generating the m_axi interface

@sai_shashi

Not a lot of info to go on, but since you were successful in the synthesis... here is a stab... If the test bench returns a non-zero value, it will report error, even if all else was successful.

Hope that helps

If so, please mark as solution accepted to close the issue. Kudos also welcomed. :-)

0 Kudos