UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply

Polyphase Filter Bank Channelizer (XAPP1161) Vivado Tcl file errors

Highlighted
Observer
Posts: 24
Registered: ‎05-17-2017

Polyphase Filter Bank Channelizer (XAPP1161) Vivado Tcl file errors

 

I downloaded and unzipped the XAPP1161 distribution folder to my C: drive

C:\xapp1161

 

Check the directory

Directory of C:\xapp1161

05/18/2017 04:16 PM <DIR> coefficients

05/18/2017 04:16 PM <DIR> golden_data

05/18/2017 04:16 PM <DIR> hdl

05/18/2017 04:16 PM <DIR> ip

05/18/2017 04:16 PM <DIR> ise

05/18/2017 04:16 PM <DIR> matlab

03/18/2013 01:38 PM 6,743 readme.txt

05/18/2017 04:16 PM <DIR> sysgen

05/18/2017 04:16 PM <DIR> vivado

 

Then I tried to build the project using the Tcl file.

 

At the Tcl console I first change directory to the location of the Tcl file.

Remember to flip the slashes to forward slashes!

 

cd C:/xapp1161/vivado

 

Then I enter the command to build the project:

 

source generate_vivado_project.tcl

 

ERROR: [Coretcl 2-1133] Requested IP 'xilinx.com:ip:fir_compiler:6.3' cannot be created. The latest available version in the catalog is 'xilinx.com:ip:fir_compiler:7.2'. If you do not wish to select a specific version please omit the version field from the command arguments, or use a wildcard in the VLNV.

 

I then edit the Tcl file to change the listed references from 6.3 to 7.2

I send a close_project command to the Tcl console

I run the source command again

 

source generate_vivado_project.tcl

 

# set_property -name CONFIG.component_name -value {tx_fir} -objects [get_ips tx_fir]

WARNING: [Vivado 12-3523] Attempt to change 'Component_Name' from 'tx_fir' to 'tx_fir' is not allowed and is ignored.

# set_property -name CONFIG.coefficientsource -value {COE_File} -objects [get_ips tx_fir]

ERROR: [IP_Flow 19-3460] Validation failed on parameter 'Coefficient File (Coefficient_File)' for Please select a COE file to be loaded.

. IP 'tx_fir'

INFO: [IP_Flow 19-3438] Customization errors found on 'tx_fir'. Restoring to previous valid configuration.

ERROR: [Common 17-39] 'set_property' failed due to earlier errors.

 

while executing

"rdi::set_property -name CONFIG.coefficientsource -value COE_File -objects tx_fir"

invoked from within

"set_property -name CONFIG.coefficientsource -value {COE_File} -objects [get_ips tx_fir]"

(file "generate_vivado_project.tcl" line 29)

 

 

Above where it says to enter a COE file to be loaded, how do I do that?

An example COE file is provided in the C:\xapp1161\coefficients folder

 

The filename is: channelizer_8.coe

The full path and filename is: C:\xapp1161\coefficients folder\channelizer_8.coe