cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ssampath
Voyager
Voyager
861 Views
Registered: ‎10-12-2016

how to get the list of all possible strategies with tcl commands ?

Hi Friends, 

I am using non-project mode. i want to use test my design for different strategies. Can you pls help on how to list all strategies using tcl command ?

Ex:  place_design -directive  Explore

Here i used Explore like i want all the strategies. 

NOTE: any help or suggestions are highly appreciated. 

Thank You 

S Sampath

-Sampath
0 Kudos
2 Replies
hongh
Moderator
Moderator
859 Views
Registered: ‎11-04-2010

Hi, @ssampath ,

You can refer to UG904 or use the help command.

Ex: place_design -help 

   check the directive option

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
syedz
Moderator
Moderator
824 Views
Registered: ‎01-16-2013

@ssampath

For non-project mode, you can get the list of directives (not strategies) using the command mentioned above. 

If you are using project mode then you can get the list of strategies using the below command: 

list_property_value STEPS.PLACE_DESIGN.ARGS.DIRECTIVE [get_runs impl_1] 

 

Refer to the below link for more info:

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_2/ug904-vivado-implementation.pdf#page=182

--Syed

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------