UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant bbertrand
Participant
9,757 Views
Registered: ‎01-24-2011

specifie ucf file fir write_xdc command

Jump to solution

Hello all,

 

How could i specifie the ucf file with write_xdc command,

my goal convert my ucf file to xdc file.

I can't add ucf file in vivado project!

 

thank you,

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Scholar pratham
Scholar
18,471 Views
Registered: ‎06-05-2013

Re: specifie ucf file fir write_xdc command

Jump to solution

@bbertrand Yes, You can only convert using PlanAhead. Please close this thread

-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
Tags (3)
0 Kudos
5 Replies
Scholar pratham
Scholar
9,754 Views
Registered: ‎06-05-2013

Re: specifie ucf file fir write_xdc command

Jump to solution

@bbertrand this command works  in planahead to convert ucf to xdc

 

http://www.xilinx.com/support/answers/50376.html

 

Let me know if you dont have planahead to convert.

-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
Tags (3)
0 Kudos
Participant bbertrand
Participant
9,745 Views
Registered: ‎01-24-2011

Re: specifie ucf file fir write_xdc command

Jump to solution

hello ,

 

I just can launch planehead with ise 14.7.

Can i launch planehead with vivado 2015? where?

0 Kudos
Scholar pratham
Scholar
9,740 Views
Registered: ‎06-05-2013

Re: specifie ucf file fir write_xdc command

Jump to solution

@bbertrand Open implemented design in planahead and run command write_xdc thats all.

 

You cannot launch planahead with vivado

-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Participant bbertrand
Participant
9,736 Views
Registered: ‎01-24-2011

Re: specifie ucf file fir write_xdc command

Jump to solution

ok thank you for you help i will work with ise for translation,

it's some funny must be use xdc file with vivado but the xdc file translation can do with ise14.7 

0 Kudos
Highlighted
Scholar pratham
Scholar
18,472 Views
Registered: ‎06-05-2013

Re: specifie ucf file fir write_xdc command

Jump to solution

@bbertrand Yes, You can only convert using PlanAhead. Please close this thread

-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
Tags (3)
0 Kudos