cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
2,191 Views
Registered: ‎08-01-2016

VLNV <analog.com:user:axi_clkgen:1.0> is not supported for the current part ?

We are working on a custom board with a Zynq on it.

It has a  ADV7511 HDMI transmitter connected to Zynq.

 

I have built linux u-boot and kernel for displaying the output of zynq on HDMI monitor

for this, I am using a HDL design from this link

 

https://github.com/analogdevicesinc/hdl/tree/hdl_2016_r2

 

Now, when i try to load this on Vivado 16.2(as the branch suggests), I encounter error as shown below:

 

VLNV <analog.com:user:axi_clkgen:1.0> is not supported for the current part.

 

Error.png

 

On the loaded design I do not see a source for clkgen

 

Design.png

 

 

Any help is highly appreciated.

 

 

Design.png
Error.png
0 Kudos
1 Reply
Highlighted
Moderator
Moderator
2,176 Views
Registered: ‎11-09-2015

Re: VLNV <analog.com:user:axi_clkgen:1.0> is not supported for the current part ?

Hi @piyushashtikar,

 

The axi_clkgen IP is in a different folder in the git repository (link). You have first to build the IP and then add it to your IP catalog.

 

This should be done if you use:

make -C projects/adv7511/zc706

 Hope that helps,

 

Regards,

 

Florent


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos