UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply
Highlighted
Newbie
Posts: 4
Registered: ‎07-06-2016

Virtex-7 FPGA VC707 - [Labtoolstcl 44-469] There is no current hw_target.

I also get Error below message.

  • [Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xc7vx485t'. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system. Resolution: Check the status of your licenses in the Vivado License Manager. For debug help search Xilinx Support for "Licensing FAQ".

I had this running about a month ago and then I hooked it back up and this is what I am getting for error codes. all the power LEDS are lit up! I am not sure if I am communicating communicating with the board.

 

This is what I have done:

1. Update to 2016.2.

2. requested new license file.

3. Reinstalled USB Drivers.

 

Thanks I hope someone has the answer!

Moderator
Posts: 1,658
Registered: ‎02-14-2014

Re: Virtex-7 FPGA VC707 - [Labtoolstcl 44-469] There is no current hw_target.

Hi guys@gmail.com,

 

Can you share the output of below command and license file here -

 

report_environment -file <directory_name>/xinfo.txt

Regards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
Newbie
Posts: 4
Registered: ‎07-06-2016

Re: Virtex-7 FPGA VC707 - [Labtoolstcl 44-469] There is no current hw_target.

Were do I find that?

license file here -

 

report_environment -file <directory_name>/xinfo.txt

 

Guy

 

Newbie
Posts: 4
Registered: ‎07-06-2016

Re: Virtex-7 FPGA VC707 - [Labtoolstcl 44-469] There is no current hw_target.

Heres a little more info!@

 

connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
report_ip_status -name ip_status
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.