UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 

FPGA-based Opal Kelly FMC-HPC Carrier module uses SuperSpeed USB 3.0 for high-speed data and configuration transfers

Xilinx Employee
Xilinx Employee
0 0 36.5K

Opal Kelly XEM7350.jpgThe 80x70mm Opal Kelly XEM7350 FMC-HPC Carrier is a SuperSpeed USB 3.0 integration module based on a Xilinx Kintex-7 XC7K70T, XC7K160T, or XC7K410T FPGA with 65,600, 162,240, or 406,720 logic cells and 240, 600, or 500 DSP48 slices respectively. In addition to the FPGAs, the XEM7350 features a USB 3.0 port for high-speed data transfers and high-speed configuration downloads and incorporates 512Mbytes of DDR3 SDRAM, on-board power supplies (the board requires only a 5V power source), 16Mbytes of system flash memory and 16Mbytes of configuration flash memory, and an FMC-HPC connector. The FMC connector makes this board an idea platform for developing high-performance systems including systems that employ the JESD204B serial interface for high-speed ADCs and DACs (implemented with a Xilinx JESD204 IP Core on the Kintex-7 FPGA).

 

Here’s a block diagram of the module:

 

 

Opal Kelly XEM7350 Block Diagram.gif 

 

Tags (1)