UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 

Fidus/Inrevium Dual-MIPI FMC board hits 2.5Gbps/lane using Meticom FPGA-to-MIPI translator ICs

Xilinx Employee
Xilinx Employee
0 0 56K

A Dual-MIPI FMC board was among the many new products jointly introduced by fidus and inrevium at this month’s NAB 2015. The board is a design aid for system developers and experimenters interested in working with the MIPI CSI-2 and DSI D-PHY specifications. The TB-FMCL-MIPI FMC card plugs into an LPC FMC connector, commonly found on many Xilinx FPGA and Zynq SoC eval boards, and level-translates between an FPGA’s or SoC’s LVDS and low-speed CMPS pins and MIPI CSI-2 and DSI D-PHY ports at rates to 2.5Gbps per lane using Meticom MC20901 (CSI-2) and MC20902 (DSI) translator ICs. Here’s a block diagram of the board:

 

 

 

fidus MIPI FMC Board.jpg

 

 

 

 

And here’s a photo of the board:

 

 

fidus MIPI FMC Board photo.jpg

 

 

Tags (2)