UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Need to power a Xilinx FPGA, Zynq SoC, or Zynq UltraScale+ MPSoC? Avnet and Infineon have a free Webinar for you on January 16.

by Xilinx Employee on ‎01-11-2018 10:30 AM (20,942 Views)

 

Providing good, filtered, reliable, and precise power to FPGAs and SoCs is an engineering challenge and if you’d like help meeting with challenge for Xilinx FPGAs, Zynq SoCs, or Zynq UltraScale+ MPSoCs in the 10W to 50W range, then Avnet and Infineon’s January 16 Webinar titled “Infineon DC/DC PMIC for FPGAs/SoCs for 10W to 50W Applications” is for you.

 

Here are the key takeaways you should get from this free Webinar:

 

 

  • Learn to simplify your BOM by replacing many of your standard regulators with one Infineon PMIC

 

  • Learn how updating to Xilinx newest recommendations for rail power consolidation leads to best integration and use case

 

  • Discover how to re-use your power design to cover your complete set of application with FPGAs/SoCs and ASICs

 

  • Lower total solution cost by high level integration and component reduction (35% board area reduction)

 

 

 

Register here.