UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

3 Eyes are Better than One for 56Gbps PAM4 Communications: Xilinx silicon goes 56Gbps for future Ethernet

by Xilinx Employee ‎03-10-2016 01:39 PM - edited ‎04-13-2016 11:35 AM (61,272 Views)

 

Based on a lot of existing SerDes and silicon technology, Xilinx has demonstrated operational 56Gbps PAM4 SerDes transceivers using test chips built using TSMC’s industry-leading 16nm FinFET+ IC process technology. The demo video accompanying this announcement appears below. The industry recognizes 56Gbps as the next dominant line rate and it’s the path forward for much faster Ethernet links. It’s what’s needed to implement 50G, 100G, 400G, and Terabit Ethernet economically.

 

On the surface, this line rate jump appears to require only one simple change. PAM4 uses four signaling levels instead of two, so you get three eyes instead of one for 2x the information transferred per clock period as shown below:

 

 

PAM4 56Gbps Eyes.jpg 

 

Of course, this “simple” change requires a radical rethink of the high-speed SerDes transmitter and receiver and wizard-like design skills. This test chip demonstration proves that that the Xilinx SerDes wizards and TSMC’s silicon process wizards have done well.

 

Here’s the short video:

 

 

 

 

Xilinx will be showcasing the 56G PAM4 transceiver technology demonstration at the upcoming OFC show (booth 3457) in Anaheim, California on March 22 to 24, 2016. For additional information on Xilinx 56G transceiver technology, click here.

Comments
by Newbie robert.xiao@jdsu.com
on ‎03-16-2016 09:13 AM

great works

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.