UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Aldec demos three Zynq-based reference designs (ADAS, IIoT gateway, and face detection) on TySOM board at Embedded World

by Xilinx Employee ‎03-17-2017 03:00 PM - edited ‎03-17-2017 04:07 PM (957 Views)

 

I did not go to Embedded World in Nuremberg this week but apparently SemiWiki’s Bernard Murphy was there and he’s published his observations about three Zynq-based reference designs that he saw running in Aldec’s booth on the company’s Zynq-based TySOM embedded dev and prototyping boards.

 

 

Aldec TySOM-2 Prototyping Board.jpg

 

Aldec TySOM-2 Embedded Prototyping Board

 

 

 

Murphy published this article titled “Aldec Swings for the Fences” on SemiWiki and wrote:

 

 

“At the show, Aldec provided insight into using the solution to model the ARM core running in QEMU, together with a MIPI CSI-2 solution running in the FPGA. But Aldec didn’t stop there. They also showed off three reference designs designed using this flow and built on their TySOM boards.

 

“The first reference design targets multi-camera surround view for ADAS (automotive – advanced driver assistance systems). Camera inputs come from four First Sensor Blue Eagle systems, which must be processed simultaneously in real-time. A lot of this is handled in software running on the Zynq ARM cores but the computationally-intensive work, including edge detection, colorspace conversion and frame-merging, is handled in the FPGA. ADAS is one of the hottest areas in the market and likely to get hotter since Intel just acquired Mobileye.

 

“The next reference design targets IoT gateways – also hot. Cloud interface, through protocols like MQTT, is handled by the processors. The gateway supports connection to edge devices using wireless and wired protocols including Bluetooth, ZigBee, Wi-Fi and USB.

 

“Face detection for building security, device access and identifying evil-doers is also growing fast. The third reference design is targeted at this application, using similar capabilities to those on the ADAS board, but here managing real-time streaming video as 1280x720 at 30 frames per second, from an HDR-CMOS image sensor.”

 

The article contains a photo of the Aldec TySOM-2 Embedded Prototyping Board, which is based on a Xilinx Zynq Z-7045 SoC. According to Murphy, Aldec developed the reference designs using its own and other design tools including the Aldec Riviera-PRO simulator and QEMU. (For more information about the Zynq-specific QEMU processor emulator, see “The Xilinx version of QEMU handles ARM Cortex-A53, Cortex-R5, Cortex-A9, and MicroBlaze.”)

 

Then Murphy wrote this:

 

“So yes, Aldec put together a solution combining their simulator with QEMU emulation and perhaps that wouldn’t justify a technical paper in DVCon. But business-wise they look like they are starting on a much bigger path. They’re enabling FPGA-based system prototype and build in some of the hottest areas in systems today and they make these solutions affordable for design teams with much more constrained budgets than are available to the leaders in these fields.”

 

 

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.