UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Boost data center bandwidth by 5x over Cat 5e and 6 cabling. Ask your doctor if Aquantia’s AQrate is right for you

by Xilinx Employee on ‎10-07-2014 08:02 AM (40,872 Views)

Aquantia’s newly announced AQrate technology—as embodied in the company’s AQR405, AQR205, and AQR105 Quad/Dual/Single AQrate PHYs—can instantly boost cabling infrastructure bandwidth by 5x by transforming existing cable infrastructure based on Cat 5e and Cat 6 cabling into fully functional 5Gbps networks. Essentially, you unplug all of those 1Gbps Ethernet line cards, replace them with 5Gbps line cards, and your data center now runs 5x faster. No cable changes. No forklift upgrades. Nada.

 

Aquantia’s AQrate PHY technology drives 5Gbps over 100m of existing Cat 5e and Cat 6 cabling. That’s truly a big deal.

 

 

Aquantia AQrate PHYs.jpg

 

 

5G Ethernet isn’t an IEEE standard and you’re not going to find off-the-shelf Ethernet ASSPs to drive Aquantia’s ingenious new AQrate PHY chips at that data rate. Ah, but Xilinx All Programmable devices and IP portfolio already support Aquantia’s AQrate technology, even though it was announced yesterday. Xilinx has been collaborating with Aquantia in preparation for this week’s announcements.

 

Note: Aquantia is an investment portfolio company of Xilinx Technology Ventures—the investment arm of Xilinx, Inc.

 

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.