UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Brief demo at SC15 by NetCOPE shows the company’s 100G Ethernet boards in action

by Xilinx Employee ‎02-09-2016 10:24 AM - edited ‎02-09-2016 10:26 AM (40,433 Views)

 

The 2-minute video below shows two 100G Ethernet cards from NetCOPE Technologies, the 2-port NFB-100G2 and the single-port NFB-100G1, in action. Both boards are based on Xilinx Virtex-7 580T FPGAs, which have 48 on-chip, 13.1Gbps GTH transceivers and more than half a million logic cells, so you can use these boards as development platforms to implement a variety of high-speed networking applications including high-speed packet capture or high-speed electronic trading.

 

 

 

 

 

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.