We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Dave Embedded to show new ONDA SOM based on Zynq UltraScale+ MPSoC at Embedded World 2017 next week

by Xilinx Employee ‎03-09-2017 11:54 AM - edited ‎03-09-2017 11:55 AM (36,290 Views)


I just received an email from Dave Embedded Systems announcing that the company will be showing its new ONDA SOM (System on Module) based on Xilinx Zynq UltraScale+ MPSoCs at next week’s Embedded World 2017 in Nuremberg. Here’s a board photo:



Dave ONDA Zynq UltraScale Plus SOM.jpg



Dave Embedded Systems ONDA SOM based on the Xilinx Zynq UltraScale+ MPSoC (Note: Facsimile Image)




And here’s a photo of the SMM’s back side showing the three 140-pin, high-density I/O connectors:




Dave ONDA Zynq UltraScale Plus SOM Back Side.jpg



Dave Embedded Systems ONDA SOM based on the Xilinx Zynq UltraScale+ MPSoC (Back Side)




Thanks to the multiple processors and programmable logic in the Zynq UltraScale+ MPSoC, the ONDA board packs a lot of processing power into its small 90x55mm board. Dave Embedded Systems plans to offer versions of the ONDA SOM based on the Zynq UltraScale+ ZU2, ZU3, ZU4, and ZU5 MPSoCs, so there should be a wide range of price/performance points to pick from while standardizing on one uniformly sized platform.


Here’s a block diagram of the board:



Dave ONDA Zynq UltraScale Plus SOM Block Diagram.jpg 


Dave Embedded Systems ONDA SOM based on the Xilinx Zynq UltraScale+ MPSoC, Block Diagram



Please contact Dave Embedded Systems for more information about the ONDA SOM.




About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.