UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Dave Jones’ EEVBlog reviews $149 Digilent Basys 3 Eval Board based on Xilinx Artix-7 FPGA

by Xilinx Employee on ‎02-03-2015 10:58 AM (18,267 Views)

Dave Jones frequently opens several packages on the Mailbag Monday editions of his EEVblog video blog. This week, he spends five minutes reviewing the $149 Digilent Basys 3 FPGA board based on a Xilinx Artix-7 XC7A35T FPGA. The review of the board starts seven minutes into the video and the review includes Dave’s short analysis of the board layout and some advice about placing bypass capacitors near an FPGA.

 

 

Digilent Basys 3.jpg

 

 

The Artix-7 XC7A35T FPGA has 33,280 logic cells, 1.8Mbits of block RAM, 90 DSP slices, and an on-chip multichannel ADC block. The Basys 3 board includes several peripheral devices useful for FPGA students and experimenters:

 

  • 16 user switches
  • 16 user LEDs
  • 5 user pushbuttons
  • 4-digit, 7-segment display
  • 4 Pmod connectors
  • 3 Standard 12-pin Pmod connectors
  • 1 dual purpose XADC signal/standard Pmod connector
  • 12-bit VGA output port
  • USB-UART Bridge
  • Serial Flash
  • Digilent USB-JTAG port for FPGA programming and communication
  • USB HID Host for mice, keyboards and memory sticks

 

The low-cost Digilent Basys 3 FPGA board represents a considerable step up from the company’s older Basys 2 board, which is based on a Xilinx Spartan-3E FPGA. The ARTIX-7 FPGA brings 15x more logic cells and 26x more RAM to the party and jumps the DSP capability from the Spartan-3E’s multipliers to the Xilinx 7 series DSP48E1 slices. In addition, you use the Xilinx Vivado Design Suite tools to develop designs based on the Artix-7 FPGA. One of the nicest things about the Digilent Basys 3 board is that Digilent has created one Web page with simple, clear instructions about how you get started with FPGA development based on Xilinx devices and design tools using the Basys 3 FPGA board.

 

Here’s Dave’s Mailbag Monday EEVblog video:

 

 

 

 

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.