We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Learn why you’ll want to dig into the SDSoC Development Environment in just 5 or 10 minutes

by Xilinx Employee on ‎08-08-2017 10:11 AM (25,385 Views)


It will take you five or ten minutes to read the new SDSoC article written by Nick Ni and Adam Taylor titled “Developing all programmable logic using the SDSoC environment” and after you’re done, you’ll have a very good idea of why you might want to try Xilinx’s new SDSoC Development Environment for C, C++, and OpenCL application development. The article quickly guides you through a typical software/hardware development cycle and then gives you the performance results for an AES cryptography application.


The resulting performance chart showing as much as a 75% reduction in clock cycles for the application alone should be enough to pique your interest:



SDSoC Performance Chart.jpg



About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.