UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

OKI IDS and Avnet develop ADAS and Level 4/5 autonomous-driving board design based on Xilinx Zynq UltraScale+ MPSoCs

by Xilinx Employee ‎12-21-2017 12:05 PM - edited ‎12-23-2017 01:40 AM (9,040 Views)

 

OKI IDS and Avnet have jointly announced a new board for developing ADAS (automated driver assist systems) and advanced SAE Level 4/5 autonomous driving systems based on two Xilinx UltraScale+ MPSoCs.

 

 

 

 

OKI Avnet ADAS Platform Based on Two Zynq UltraScale Plus MPSoCs.jpg 

 

 

 

Avnet plans to start distributing the board in Japan in February, 2018 and will then expand into other parts of Asia. The A4-sized board interfaces to as many as twelve sensors including cameras and other types of imagers. The board operates on 12V and, according to the announcement, consumes about 20% of the power compared to similar hardware based on GPUs because it employs the Xilinx UltraScale+ MPSoCs as its foundation.  

 

Want to see this board in person? You can, at the Xilinx booth at Automotive World 2018 being held at Tokyo Big Site from January 17th to 19th. (Hall East 6, 54-47)

 

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.