UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Omnitek’s got several new real-time video demos to show you later this month at NAB Show in Las Vegas

by Xilinx Employee on ‎04-13-2017 01:57 PM (19,916 Views)

 

Later this month at the NAB Show in Las Vegas, you’ll be able to see several cutting-edge video demos based on the Xilinx Zynq SoC and Zynq UltraScale+ MPSoC in the Omnitek booth (C7915). First up is an HEVC video encoder demo using the embedded, hardened video codec built into the Zynq UltraScale+ ZU7EV MPSoC on a ZCU106 eval board. (For more information about the ZCU106 board, see “New Video: Zynq UltraScale+ EV MPSoCs encode and decode 4K60p H.264 and H.265 video in real time.”)

 

Next up is a demo of Omnitek’s HDMI 2.0 IP core, announced earlier this year. This core consists of separate transmit and receive subsystems. The HDMI 2.0 Rx subsystem can convert an HDMI video stream (up to 4KP60) into an RGB/YUV video AXI4-Stream and places AUX data in an auxiliary AXI4-Stream. The HDMI 2.0 Tx subsystem converts an RGB/YUV video AXI4-Stream plus AUX data into an HDMI video stream. This IP features a reduced resource count (small footprint in the programmable logic) and low latency.

 

Finally, Omnitek will be demonstrating a new addition to its OSVP Video Processor Suite: a real-time Image Signal Processing (ISP) Pipeline Subsystem, which can create an RGB video stream from raw image-sensor outputs. The ISP pipeline includes blocks that perform image cropping, defective-pixel correction, black-level compensation, vignette correction, automatic white balancing, and Bayer filter demosaicing.

 

 

 

Omnitek ISP Pipeline Subsystem.jpg

 

 

Omnitek’s Image Signal Processing (ISP) Pipeline Subsystem

 

 

 

 

Both the HDMI 2.0 and ISP Pipeline Subsystem IP are already proven on Xilinx All Programmable devices including all 7 series devices (Artix-7, Kintex-7, and Virtex-7), Kintex UltraScale and Virtex UltraScale devices, Kintex UltraScale+ and Virtex UltraScale+ devices, and Zynq-7000 SoCs and Zynq UltraScale+ MPSoCs.

 

 

Comments
by Explorer
on ‎04-16-2017 08:21 AM
This is so interesting, Omnitek always working on some good and innovation IP, still waiting for costumer feedback.
I will try this IP on my eval Zedboard Smiley Happy
Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.