UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Samtec’s Virtex UltraScale+ FPGA VCU118 Eval Kit demo carries four 28Gbps lanes across board to QSFP optical cage

by Xilinx Employee ‎04-06-2017 08:54 AM - edited ‎04-07-2017 06:32 AM (13,699 Views)

 

Samtec recorded a demo of its FireFly FQSFP twinax cable assembly carrying four 28Gbps lanes from a Xilinx Virtex UltraScale+ VU9P FPGA on a VCU118 eval board to a QSFP optical cage at the recent OFC 2017 conference in Los Angeles. (The Virtex UltraScale+ VU9P FPGA has 120 GTY transceivers capable of 32.75Gbps operation and the VCU118 eval kit includes the Samtec FireFly daughtercard with cable assembly.) Samtec’s FQSFP assembly plugs mid-board into a FireFly connector on the VCU118 board. The 28Gbps signals then “fly over” the board through to the QSFP cage and loop back over the same path, where they are received back into the FPGA. The demonstration shows 28Gbps performance on all four links with zero bit errors.

 

As explained in the video, the advantage to using the Samtec FireFly flyover system is that it takes the high-speed 28Gbps signals out of the pcb-design equation, making the pcb easier to design and less expensive to manufacture. Significant savings in pcb manufacturing cost can result for large board designs, which no longer need to deal with signal-integrity issues and controlled-impedance traces for such high-speed routes.

 

Samtec has now posted the 2-minute video from OFC 2017 on YouTube and here it is:

 

 

 

 

 

Note: Martin Rowe recently published a related technical article about the Samtec FireFly system titled "High-speed signals jump over PCB traces" on the EDN.com Web site.

 

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.