We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Step-by-Step instructions for getting up and running with a Zynq-based Digilent ZYBO trainer board

by Xilinx Employee ‎07-27-2017 04:26 PM - edited ‎07-27-2017 04:29 PM (40,131 Views)


Digilent’s Alex Wong has just published a blog post on RS-online’s DesignSpark with step-by step instructions for getting your first program (“hello world” of course) running on a Digilent ZYBO trainer board, based on a Xilinx Zynq Z7010 SoC. It doesn’t get any simpler than this.



Digilent ZYBO.jpg


About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.