UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Zynq-based snickerdoodle says "Hello World" using Micrium’s µC/OS

by Xilinx Employee ‎07-27-2016 11:10 AM - edited ‎07-27-2016 11:13 AM (8,250 Views)

 

Jonathan Blanchard is a lead embedded software developer for real-time kernels at Micrium, the company responsible for the µC/OS RTOS that runs on a variety of processors including the dual-core ARM Cortex-A9 processor in the Xilinx Zynq-7000 SoC. Blanchard has just posted a step-by-step blog about getting Micrium’s µC/OS up and running on the low-cost, Zynq-based snickerdoodle board from krtkl. (For more information about the snickerdoodle, see “$55, Zynq-based, WiFi-enabled Snickerdoodle makes MAKE:’s Maker’s Guide to Boards.”)

 

 

Snickerdoodle.jpg

Zynq-based snickerdoodle board from krtkl

 

 

Blanchard’s blog describes how he installed the µC/OS RTOS on the snickerdoodle and how he downloaded the appropriate BSP for the Xilinx SDK under Vivado 2016.2.

 

His blog ends happily: “And indeed, the snickerdoodle said hello.”

 

 

 

 

 

 

 

 

Labels
About the Author
  • Be sure to join the Xilinx LinkedIn group to get an update for every new Xcell Daily post! ******************** Steve Leibson is the Director of Strategic Marketing and Business Planning at Xilinx. He started as a system design engineer at HP in the early days of desktop computing, then switched to EDA at Cadnetix, and subsequently became a technical editor for EDN Magazine. He's served as Editor in Chief of EDN Magazine, Embedded Developers Journal, and Microprocessor Report. He has extensive experience in computing, microprocessors, microcontrollers, embedded systems design, design IP, EDA, and programmable logic.