cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
rodrigomelo9
Observer
Observer
338 Views
Registered: ‎05-07-2021

A recommended FMC debug board to connect into a ZCU102 board?

Jump to solution

Hi. I was checking https://www.xilinx.com/products/boards-and-kits/fmc-cards.html#interfaceperipherals

The XM105 board seems a good option but is not a perfect match with ZCU102 (XM105 uses the HPC pins C to K, and the ZCU102 A to D and G to H, moreover, the VADJ will be not 2.5, 1.8 instead). Is there something more suitable? I am mostly interested in connecting flying wires.

Thanks

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
rodrigomelo9
Observer
Observer
237 Views
Registered: ‎05-07-2021

Thanks, but these are not what I looking for. For reference, apart from the XM105, I found:

Rodrigo

View solution in original post

2 Replies
vatsalt
Xilinx Employee
Xilinx Employee
259 Views
Registered: ‎06-25-2020

Hi,

Please check the below link which lists different FMC cards compatibility with Eval boards.

https://www.xilinx.com/products/boards-and-kits/fmc-cards.html#other

 

Best Regards,

Vatsal

------------------------------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.

------------------------------------------------------------------------------------------------
0 Kudos
rodrigomelo9
Observer
Observer
238 Views
Registered: ‎05-07-2021

Thanks, but these are not what I looking for. For reference, apart from the XM105, I found:

Rodrigo

View solution in original post