cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Observer
Observer
4,617 Views
Registered: ‎02-16-2010

Connection between OV9715 camera and ML605 FPGA board

Jump to solution


Hi,

 

I am using OV9715 camera to communicate with my ML605 FPGA board. 

However, when I power the FPGA board ON, I receive nothing from the camera.

It seems that the camera is powered ON when the FPGA is ON.

So I am wondering if there is any configuration should be done before the camera starts working.

However, I didn't find any relavent information from the datasheet...

Can anyone please offer some suggestions?

I am quite new to this, any hint would be really appreciated.

 

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Observer
Observer
5,448 Views
Registered: ‎02-16-2010

 

I've figured it out by myself.

We need to follow the power up procedures on the datasheet to start the camera.

The camera works with default register settings.

View solution in original post

0 Kudos
2 Replies
Highlighted
Observer
Observer
5,449 Views
Registered: ‎02-16-2010

 

I've figured it out by myself.

We need to follow the power up procedures on the datasheet to start the camera.

The camera works with default register settings.

View solution in original post

0 Kudos
Highlighted
Instructor
Instructor
4,601 Views
Registered: ‎07-21-2009

I've figured it out by myself.

We need to follow the power up procedures on the datasheet to start the camera.

 

It's a good thing you figured this out on your own.  The datasheet is available only under NDA.

 

-- Bob Elkind

SIGNATURE:
README for newbies is here: http://forums.xilinx.com/t5/New-Users-Forum/README-first-Help-for-new-users/td-p/219369

Summary:
1. Read the manual or user guide. Have you read the manual? Can you find the manual?
2. Search the forums (and search the web) for similar topics.
3. Do not post the same question on multiple forums.
4. Do not post a new topic or question on someone else's thread, start a new thread!
5. Students: Copying code is not the same as learning to design.
6 "It does not work" is not a question which can be answered. Provide useful details (with webpage, datasheet links, please).
7. You are not charged extra fees for comments in your code.
8. I am not paid for forum posts. If I write a good post, then I have been good for nothing.
0 Kudos