cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
7,271 Views
Registered: ‎06-19-2015

Doubts in UG523

Jump to solution

Hi, I am refering to UG523  "Getting Started with the Xilinx Spartan-6 FPGA SP601 Evaluation Kit". v1.5 . Page 15 point 3 referes to SPI flash configuration but the Mode pins in the figure of 1-15 show that BPI flash has been configured. For this example are we using SPI Flash or BPI flash? Can you clarify

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Scholar
Scholar
13,833 Views
Registered: ‎06-05-2013

Re: Doubts in UG523

Jump to solution

@ravikanth419331 That is SPI, That figure is just to show users that mode pins switch are there that has to be changed accordingly.

 

SPI=M[1:0]=01

BPI = M[1:0]= 00

-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
1 Reply
Highlighted
Scholar
Scholar
13,834 Views
Registered: ‎06-05-2013

Re: Doubts in UG523

Jump to solution

@ravikanth419331 That is SPI, That figure is just to show users that mode pins switch are there that has to be changed accordingly.

 

SPI=M[1:0]=01

BPI = M[1:0]= 00

-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

0 Kudos