UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
679 Views
Registered: ‎12-10-2018

EK-U1-ZCU102-G Xilinx Zynq Ultrascale+MPSoC ZCU102

Hi.....Myself Brijendra Sharma @IIT Kanpur, My questions are ........I want to boot the Zynq Ultrascale EK-U1-ZCU102-G Xilinx Zynq Ultrascale+MPSoC ZCU102 & EK-U1-ZCU111-G board. So i need your help that how we can simulate such booting process through eMMC via vivado Hlx edition software. i want to this through simulation. Once i it works fine through Simulator than i will do this through hardware. Is there any simulation vedio?? Please help me.

 

Brijendra Sharma

P Scientist @IIT Kanpur

0 Kudos
5 Replies
Xilinx Employee
Xilinx Employee
636 Views
Registered: ‎06-21-2018

Re: EK-U1-ZCU102-G Xilinx Zynq Ultrascale+MPSoC ZCU102

Hi Brijendra,

When you say you want to simulate booting, what exactly do you mean?

Maybe the following links are of help:

https://www.xilinx.com/products/intellectual-property/axi-vip.html

https://www.xilinx.com/support/answers/70373.html

Thanks,

Andres

0 Kudos
529 Views
Registered: ‎12-10-2018

EK-U1-ZCU102-G Xilinx Zynq Ultrascale+MPSoC ZCU102

Dear Sir?mam.

Thank you sir/Mam.

          Sir/mam, I will see your link in details. Also i would like to tell you, the meaning of simulation is...I want to test LED blinking through Vivado & Zynq Ultrascale 102 MPSoC evaluation board. How we can test LED blinking.

Also, I would like to tell you, I am new guy for Zynq Ultrascale 102 MPSoC evaluation board. So its my warm request to you that,please provide me corresponding link. when i am opening a Example Project in vivado IDE and after generating bit-stream, what next step i do ???.....So that this example can test on Zynq Ultrascale 102 MPSoC evaluation board. Also i will use USB in instead of JTAG for programming.

waiting for your valuable reply.

Brijendra

 

0 Kudos
Moderator
Moderator
467 Views
Registered: ‎06-05-2013

Re: EK-U1-ZCU102-G Xilinx Zynq Ultrascale+MPSoC ZCU102

Hi Bijendra,

You can follow this tutorial https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_1/ug1209-embedded-design-tutorial.pdf

There are different example designs which you can create and try on ZCU102 board. Also this board support multiple boot modes. For that you can refer to chapter 5 of above tutorial.

Thanks
harshit
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
377 Views
Registered: ‎12-10-2018

Re: EK-U1-ZCU102-G Xilinx Zynq Ultrascale+MPSoC ZCU102

Thank you Harshit ji.

This tutorial, I am already following.

Harshit ji, I request you one thing Can you please share any c based example code like led toggling as per xczu102 board.

 

 

0 Kudos
Moderator
Moderator
347 Views
Registered: ‎06-05-2013

Re: EK-U1-ZCU102-G Xilinx Zynq Ultrascale+MPSoC ZCU102

Hi Bijendra,

Please refer to this thread https://forums.xilinx.com/t5/Embedded-Processor-System-Design/Blinking-LED-with-Xilinx-Zynq-Ultrascale/td-p/890500
I don't have example design ready.

Thanks
Harshit
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos