cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
fabiend
Contributor
Contributor
2,898 Views
Registered: ‎07-22-2009

Flash issue on board Spartan 3A DSP 3400.

Jump to solution
Hello,

I have an issue when I tried to boot my program using the Flash Memory. I'm using the board spartan 3A-DSP 3400, and when I want to program my flash memory (using EDK), I have this error message:

"* Opening image file to be programmed...done.
* Setting up Flashwriter sources for compilation...
* Performing CFI Query on the flash part(s)...
* ERROR: Flashwriter application reported an error: Unable to successfully query target part layout using CFI!
* Flashwriter terminating !
Done!"

 

 

Do you know how can I solve this issue ?

Best Regards,

Fabien

0 Kudos
1 Solution

Accepted Solutions
tushar_dongre
Xilinx Employee
Xilinx Employee
3,390 Views
Registered: ‎02-25-2009

The supported flash architecture is mentioned in the document est_rm.pdf (http://www.xilinx.com/support/documentation/sw_manuals/xilinx11/est_rm.pdf).

 

Make sure the FLASH is CFI complaint. You can compare the datasheet of flash with the Intel Strata flash device 28F256J3.

View solution in original post

1 Reply
tushar_dongre
Xilinx Employee
Xilinx Employee
3,391 Views
Registered: ‎02-25-2009

The supported flash architecture is mentioned in the document est_rm.pdf (http://www.xilinx.com/support/documentation/sw_manuals/xilinx11/est_rm.pdf).

 

Make sure the FLASH is CFI complaint. You can compare the datasheet of flash with the Intel Strata flash device 28F256J3.

View solution in original post