UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer mflmfl
Observer
2,690 Views
Registered: ‎06-10-2011

Hardware co-simulation w ML550?

I'd like to do hardware co-simulation (via Mathworks Simulink/Sysgen) using an ML550 board. The ML550 does not come up as one of the choices in the Sysgen pulldown. I presume there's a driver that I need to install - anyone know where to get it?

 

 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
2,684 Views
Registered: ‎11-28-2007

Re: Hardware co-simulation w ML550?

I don't think that a HWCOSIM target for ML550 exists. But you can easily create one yourself. Take a look at the page below for more details. You can ignore the NMM ports if you don't plan to use them.

 

http://myfpgablog.blogspot.com/2009/12/sysgen-create-new-hwcosim-target-with.html 

 


@mflmfl wrote:

I'd like to do hardware co-simulation (via Mathworks Simulink/Sysgen) using an ML550 board. The ML550 does not come up as one of the choices in the Sysgen pulldown. I presume there's a driver that I need to install - anyone know where to get it?

 

 




Cheers,
Jim
0 Kudos