UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
8,746 Views
Registered: ‎01-24-2014

KC705, FMC connectors, relative distances for mezzanine design

Jump to solution

I'm designing a mezzanine that must be plugged into both J2 and J22 FMC connectors on KC705 evaluation board.

I cannot find a document reporting the relative distances so I can precisely place the FMC connectors on my mezzanine.

Thanks

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
15,702 Views
Registered: ‎10-13-2011

Re: KC705, FMC connectors, relative distances for mezzanine design

Jump to solution

Salve Massimo,

not sure if you are focusing on the board dimensions or the connetors themselves.

 

With regards of the KC705, you can find the gerber files online where you can take a look to the on-board component placement

http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/boards_and_kits/kintex-7_boards_and_kits/kintex-7_fpga_kc705_evaluation_kit.html

 

If you need more details about the FMC connectors, please note that this is a VITA 57.1 standard

http://www.vita.com/fmc.html

 

Also FMC pinout available on KC705 Evaluation Board User Guide:

http://www.xilinx.com/support/documentation/boards_and_kits/kc705/ug810_KC705_Eval_Bd.pdf

 

Regards,

Andrea

1 Reply
Xilinx Employee
Xilinx Employee
15,703 Views
Registered: ‎10-13-2011

Re: KC705, FMC connectors, relative distances for mezzanine design

Jump to solution

Salve Massimo,

not sure if you are focusing on the board dimensions or the connetors themselves.

 

With regards of the KC705, you can find the gerber files online where you can take a look to the on-board component placement

http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/boards_and_kits/kintex-7_boards_and_kits/kintex-7_fpga_kc705_evaluation_kit.html

 

If you need more details about the FMC connectors, please note that this is a VITA 57.1 standard

http://www.vita.com/fmc.html

 

Also FMC pinout available on KC705 Evaluation Board User Guide:

http://www.xilinx.com/support/documentation/boards_and_kits/kc705/ug810_KC705_Eval_Bd.pdf

 

Regards,

Andrea