cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
8,313 Views
Registered: ‎07-21-2012

ML605 system monitor problem on windows 7

Jump to solution

Hi,

 

I have a ML605 board, windows 7 OS  and xilinx ISE 13.2.
I want to run system monitor and see the power consumption of board so I downloaded the

document "XTP048_12.1_c.pdf" and "rdf0012_12.1.zip"  from xilinx site and followed the instructions in PDF file.

all things are OK till I reach slide 12.

when I run xmd command, it says that there is no internal or external command like xmd and I stuck.

 

I would appreciate if anyone can help me.

Thanks in advance

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
14,940 Views
Registered: ‎01-15-2008

do you have EDK installed? you need EDK system software to use this command.

check the following link for the ISE design suite : embedded edition details

http://www.xilinx.com/products/design-tools/ise-design-suite/index.htm

--Krishna

View solution in original post

2 Replies
Highlighted
Moderator
Moderator
14,941 Views
Registered: ‎01-15-2008

do you have EDK installed? you need EDK system software to use this command.

check the following link for the ISE design suite : embedded edition details

http://www.xilinx.com/products/design-tools/ise-design-suite/index.htm

--Krishna

View solution in original post

Highlighted
Visitor
Visitor
8,267 Views
Registered: ‎07-21-2012

Hi Krishna

 

thanks for your response. Actually I have installed EDK, but the problem was that they weren't add to the

Evnironmental variables in windows. I just added the EDK\bin\nt to it and the problem was solved

 

regards

0 Kudos