07-08-2011 05:54 AM
I wanna ask
I want to boot my ace file that contains opensparc_t1 with operating system opensolaris
But, I have a problem when I connect USB from FPGA XUPV5-LX110T to my laptop
My laptop seems doesn't have driver of the FPGA
My device manager shows when FPGA is connected, there is other device (unknown device) named CYPRESS EZ-OTG, but this name fades away when the USB unconnected
How I solve this problem?
For Info: I've install all design suit of Xilinx ISE 12.2
07-08-2011 06:39 AM
what are you trying to accomplish? It's hard to follow based on your post here. the more verbose about what you need to do, what you expect to happen, what you've tried, and what is going wrong will make it easier for people here to help you out.
07-10-2011 09:26 AM
ISE12.2 tools automatically loads cable drivers. Load ISE tools and try once again. Please verify jumper and switch settings as per user guide. Follow instructions as per getting started guide recommendations.
What operating system (O/S) in your system. Sun Solaris kind of some O/S does not support.