03-27-2020 03:22 PM
My PC can only detect 3 COM ports without the communication port like the following picture.
I checked the driver of my PC, the PC can detecte the USB -- UART port with another PFGA board（not ZCU104), like the following picture:
And, When i tried to do the interface test. i got this error:
I also did the Built-In Self-Test (BIST) and it is also failed:
When I tried to restore ZCU104 MT25QU512 QSPI Flash following this document i got this error:
BOOT_MODE REG = 0x0000
Finished running FSBL.
Problem in running uboot
Flash programming initialization failed.
ERROR: [Labtools 27-3161] Flash Programming Unsuccessful
program_hw_cfgmem: Time (s): cpu = 00:00:06 ; elapsed = 00:00:14 . Memory (MB): peak = 1340.973 ; gain = 0.570
ERROR: [Common 17-39] 'program_hw_cfgmem' failed due to earlier errors.
"program_hw_cfgmem -hw_cfgmem [get_property PROGRAM.HW_CFGMEM [lindex [get_hw_devices] 0 ]]"
(file "zcu104_program_qspi.tcl" line 27).
How can I solve this problem?
03-30-2020 10:44 AM
The ZCU104 doesn't use the CP210x for the USB interface.
Instead, it uses an FT4232 chip (U151 in the schematics) so there's nothing wrong with what your Device Manager detects.
Can you send a screenshot of Vivado Hardware Manager detecting the MPSoC?
Also, can you provide the Serial Numbers from the stickers?
04-04-2020 08:03 AM
Hi,andresb. Many thanks for your kindly reply.
The screenshot of Vivado Hardware Manager detecting the MPSoC is:
Is there any problem with the hardware?
Looking forward to your reply.