cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
BHL
Visitor
Visitor
306 Views
Registered: ‎03-22-2021

VC709 Hole pattern

Jump to solution

I'm trying to make a CAD-drawing for a mounting plate for a VC709 but I do not have a board handy

at the moment. I have looked at hundreds och PDF-pages and can't seem to find anything at all that

describes the hole pattern, distances, hole sizes etc. for the board (as pictured below).

Does it follow some sort of standard? Is there some document I have missed?

BHL_0-1616406350213.png

 

0 Kudos
1 Solution

Accepted Solutions
258 Views
Registered: ‎01-22-2015

@BHL 

Welcome to the Community Forum!

Please search the Xilinx site for the following:

VC709_gerber_dxf.jpg

In the vc709_Gerber_files_rfd0201_rev1_0.zip download you will find both .dxf and gerber files from which you can get the dimensions you need.

Cheers,
Mark

View solution in original post

2 Replies
259 Views
Registered: ‎01-22-2015

@BHL 

Welcome to the Community Forum!

Please search the Xilinx site for the following:

VC709_gerber_dxf.jpg

In the vc709_Gerber_files_rfd0201_rev1_0.zip download you will find both .dxf and gerber files from which you can get the dimensions you need.

Cheers,
Mark

View solution in original post

BHL
Visitor
Visitor
203 Views
Registered: ‎03-22-2021

Thank you very much!
That did the trick!

0 Kudos