UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
502 Views
Registered: ‎04-12-2017

VCU118 ES1 parts gone in 2018.1 and 2018.2 release?

Jump to solution

Are the VCU118 ES1 parts no longer supported in 2018?

 

Should I be able to use the non ES1 board file instead? I've been doing so but have found that my data transfers with the MM port will hang sometimes with apparently no interrupt / poll finished in the engine. I've looked at the signals and the read/write transfer seems to be fine at the axi-mm port of the XDMA, and I've tried to with the last two version of the xilinx driver, so I'm not sure what it could be other than the part/board selected. (Guess I should take this to a different board if this is the issue...) 

 

Thanks for the help,

 

Matt

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Advisor evgenis1
Advisor
497 Views
Registered: ‎12-03-2007

Re: VCU118 ES1 parts gone in 2018.1 and 2018.2 release?

Jump to solution

Hi matt@systemviewinc.com , 

 

Please take a look at "Vivado 2018.1 missing ES parts" thread [link]. It discusses this exact issue.

 

Thanks,

Evgeni

Tags (1)
2 Replies
Highlighted
Advisor evgenis1
Advisor
498 Views
Registered: ‎12-03-2007

Re: VCU118 ES1 parts gone in 2018.1 and 2018.2 release?

Jump to solution

Hi matt@systemviewinc.com , 

 

Please take a look at "Vivado 2018.1 missing ES parts" thread [link]. It discusses this exact issue.

 

Thanks,

Evgeni

Tags (1)
448 Views
Registered: ‎04-12-2017

Re: VCU118 ES1 parts gone in 2018.1 and 2018.2 release?

Jump to solution
Thanks for the link evgensis1, it is what I need to know.
0 Kudos