Showing results for 
Show  only  | Search instead for 
Did you mean: 
Registered: ‎11-30-2016

ZC702 MIO XAPP1223



I am trying to follow along xapp1223 which details how to use the secure key driver library to change the crypto key stored in bbram.


The tutorial itself uses a zedboard as the example and states the connections needed externally for it, which is MIO pins 13 10 11 and 12, but the ZC702 MIO pins the app note sayss to use are 17 18 19 and 20, which from what I can tell are connected to the RJ45 ethernet connector.


Since I am trying to follow along with the app note I would rather not veer too far of course trying to get it to work, but I cannot figure out how to do it without starting from scratch and rerouting the PMOD connectors on the board to the MIO somehow, (I was thinking I would need to fire up Vivado and do some stuff in there).


Have I misread the how the ZC702 is wired up or will I need to restart some stuff?



0 Kudos
0 Replies