cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
sugumar
Visitor
Visitor
1,073 Views
Registered: ‎10-08-2020

ZC706 Evaluation Kit ordering part number

Jump to solution

We are planning to order ZC706 Zynq evaluvation kit and we found there are two ordering part number is available EK-Z7-ZC706-G & EK-Z7-ZC706-G-J.

I am unable to find the difference b/w these two parts. Can you explain in detail what is the difference b/w these two ordering part numbers?

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
romisaas
Xilinx Employee
Xilinx Employee
1,066 Views
Registered: ‎02-12-2020

Hi @sugumar,

EK-Z7-ZC706-G  is ZYNQ-7000 AP SoC ZC706 Evaluation Kit

EK-Z7-ZC706-G-J is ZYNQ-7000 AP SoC ZC706 Evaluation Kit, Japan Specific

I don't see a difference between both datasheets 

Please let me know if you still need more assistance.
Thanks,
R.Samhoud
------------------------------------------------------------------------------
Don't forget to reply, give Kudo and accept as a solution
------------------------------------------------------------------------------

 

 

View solution in original post

6 Replies
romisaas
Xilinx Employee
Xilinx Employee
1,067 Views
Registered: ‎02-12-2020

Hi @sugumar,

EK-Z7-ZC706-G  is ZYNQ-7000 AP SoC ZC706 Evaluation Kit

EK-Z7-ZC706-G-J is ZYNQ-7000 AP SoC ZC706 Evaluation Kit, Japan Specific

I don't see a difference between both datasheets 

Please let me know if you still need more assistance.
Thanks,
R.Samhoud
------------------------------------------------------------------------------
Don't forget to reply, give Kudo and accept as a solution
------------------------------------------------------------------------------

 

 

View solution in original post

sugumar
Visitor
Visitor
1,052 Views
Registered: ‎10-08-2020

Hi,

Thanks for the confirmation. In the user manual the ZC706 board operating temperature is mentioned as 0 to +45deg C. May I know what is the limiting factor to +45deg C.

If we need to increase the operating Temperature to +55deg C what changes are required in ZC706 board (Like Fan change)?

0 Kudos
romisaas
Xilinx Employee
Xilinx Employee
999 Views
Registered: ‎02-12-2020

Hi @sugumar,

for ZC706 board device which is xc7z045ffg900-2  in the datasheet the operating temperature is -40°C to 100°C 

temp1.PNG

while for the ZC706 board itself in the UG the operating temperature is 0°C to 45°C

temp2.PNG

 and this means that there are other components on the board that tolerates up to 45°C .

 

Hope this helps,

Thanks,
R.Samhoud
------------------------------------------------------------------------------
Don't forget to reply, give Kudo and accept as a solution
------------------------------------------------------------------------------
sugumar
Visitor
Visitor
935 Views
Registered: ‎10-08-2020

Hi,

Can you give the exact component part/detail which is limiting the operating temperature upto +45deg C?

This is required to finalize this board or choose alternate board for our requirement.

Regards,

Sugumar K

0 Kudos
sugumar
Visitor
Visitor
757 Views
Registered: ‎10-08-2020

Can you provide the FAN with heat-sink mounted above Zynq FPGA part: XC7Z045-2FFG900C?

This details is not available in schematic, BOM of ZC706 board.

0 Kudos
romisaas
Xilinx Employee
Xilinx Employee
717 Views
Registered: ‎02-12-2020

Hi @sugumar,

According to the BOM For ZC706 the Manufacture P/N is XLX002: https://www.radianheatsinks.com/product/xlx002/ 

For ZC706 BOM please download from Xilinx.com : https://www.xilinx.com/member/forms/download/design-license.html?cid=396438&filename=zc706-bom-rdf0205.zip 

Is there any further assistance required in relation to this matter? If so, please let us know and we will be glad to help you further then.
 
However, if your query is answered now, please mark a response as 'Accepted Solution' (more info on this can be found here: https://forums.xilinx.com/t5/help/faqpage/faq-category-id/solutions#solutions), so that the topic can be completed then.
 
We appreciate your help.
Kind Regards,
R.Samhoud
-------------------------------------------------------------------------
Don’t forget to reply, give Kudo, and accept as a solution.
-------------------------------------------------------------------------
0 Kudos