cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
339 Views
Registered: ‎10-08-2020

ZC706 Evaluation Kit ordering part number

We are planning to order ZC706 Zynq evaluvation kit and we found there are two ordering part number is available EK-Z7-ZC706-G & EK-Z7-ZC706-G-J.

I am unable to find the difference b/w these two parts. Can you explain in detail what is the difference b/w these two ordering part numbers?

Tags (1)
0 Kudos
5 Replies
Highlighted
Xilinx Employee
Xilinx Employee
332 Views
Registered: ‎02-12-2020

Hi @sugumar,

EK-Z7-ZC706-G  is ZYNQ-7000 AP SoC ZC706 Evaluation Kit

EK-Z7-ZC706-G-J is ZYNQ-7000 AP SoC ZC706 Evaluation Kit, Japan Specific

I don't see a difference between both datasheets 

Please let me know if you still need more assistance.
Thanks,
R.Samhoud
------------------------------------------------------------------------------
Don't forget to reply, give Kudo and accept as a solution
------------------------------------------------------------------------------

 

 

Highlighted
Visitor
Visitor
318 Views
Registered: ‎10-08-2020

Hi,

Thanks for the confirmation. In the user manual the ZC706 board operating temperature is mentioned as 0 to +45deg C. May I know what is the limiting factor to +45deg C.

If we need to increase the operating Temperature to +55deg C what changes are required in ZC706 board (Like Fan change)?

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
265 Views
Registered: ‎02-12-2020

Hi @sugumar,

for ZC706 board device which is xc7z045ffg900-2  in the datasheet the operating temperature is -40°C to 100°C 

temp1.PNG

while for the ZC706 board itself in the UG the operating temperature is 0°C to 45°C

temp2.PNG

 and this means that there are other components on the board that tolerates up to 45°C .

 

Hope this helps,

Thanks,
R.Samhoud
------------------------------------------------------------------------------
Don't forget to reply, give Kudo and accept as a solution
------------------------------------------------------------------------------
Highlighted
Visitor
Visitor
201 Views
Registered: ‎10-08-2020

Hi,

Can you give the exact component part/detail which is limiting the operating temperature upto +45deg C?

This is required to finalize this board or choose alternate board for our requirement.

Regards,

Sugumar K

0 Kudos
Highlighted
Visitor
Visitor
23 Views
Registered: ‎10-08-2020

Can you provide the FAN with heat-sink mounted above Zynq FPGA part: XC7Z045-2FFG900C?

This details is not available in schematic, BOM of ZC706 board.

0 Kudos