cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
EtronYang
Observer
Observer
613 Views
Registered: ‎01-16-2021

ZC706 J37 HPC Connector Issue

Jump to solution

Hello everyone, I recently took over the company's previous case. It uses the ZC706 development board. Because this board has very few GPIO resources, but I don't want to use ILA to debug. So the idea was to find J37 HPC Connector.

 

The J37 HPC Connector part number is: Samtec ASP_134486_01.

Then, should the corresponding socket model be ASP_134486_02 ?

2.jpg

Sincerely,

ShengYang

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
maps-mpls
Mentor
Mentor
533 Views
Registered: ‎06-20-2017

What's wrong with VLA/ILA?  Unless you're short on resources, or have scripts already designed for an external logic analyzer, I don't see the value in this.

Anyway, have a look at:

ZC706 User guide

VITA 57.1 FMC specification

ZC706 schematics

 

*** Destination: Rapid design and development cycles *** Please remember to give internet points to those who help you here. ***

View solution in original post

3 Replies
maps-mpls
Mentor
Mentor
534 Views
Registered: ‎06-20-2017

What's wrong with VLA/ILA?  Unless you're short on resources, or have scripts already designed for an external logic analyzer, I don't see the value in this.

Anyway, have a look at:

ZC706 User guide

VITA 57.1 FMC specification

ZC706 schematics

 

*** Destination: Rapid design and development cycles *** Please remember to give internet points to those who help you here. ***

View solution in original post

mburns122
Visitor
Visitor
409 Views
Registered: ‎01-26-2016

HPC connector ASP-134486-01 on an FPGA Carrier Card like the ZC706 typically mates to HPC connector ASP-134488-01 on an FMC.

Visit www.samtec.com/fmc for more details.

0 Kudos
EtronYang
Observer
Observer
381 Views
Registered: ‎01-16-2021

Dear mburns122,

Thank you very much, otherwise Xilinx there is really no manufacturer without information.

Sincerely

ShengYang

0 Kudos