cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
polyee13
Explorer
Explorer
7,048 Views
Registered: ‎11-28-2011

ZC706 PCIe TRD Qt GUI

Think I'm having an issue while trying to run the Qt GUI on the ZC706.  I am able to program QSPI, and able to get the TeraTerm terminal up and running.  The init.sh script runs but all I see on the HDMI output is a black screen with a mouse cursor in the middle of the screen.  I have a keyboard and mouse hooked up to a usb hub that is connected to the USB 2.0 ULPI Controller MIcro-B Connector on the ZC706.  Does the board have to be in a PCIe slot in order for the Qt GUI (in PS)  to come up?

Tags (3)
0 Kudos
Reply
3 Replies
wide_road
Visitor
Visitor
7,034 Views
Registered: ‎05-29-2013

is it like the windows xp operation system? is the usb driver correctly configured? 

0 Kudos
Reply
polyee13
Explorer
Explorer
7,028 Views
Registered: ‎11-28-2011

Figured it out.  In order for the Qt GUI to run properly, it's imperative that the PCIe link is up, which implies that the ZC706 is inserted in a pcie slot, receiving the reference clock.

0 Kudos
Reply
jangire
Adventurer
Adventurer
7,022 Views
Registered: ‎09-21-2012

Hi ,

 

Please refer to the below documentation and follow step by step procedure.

 

http://www.xilinx.com/support/documentation/boards_and_kits/zynq-7000/zc706_ug/v2_0/ug963-zc706-pcie-trd-ug.pdf

 

http://wiki.xilinx.com/zynq-linux

 

Regards

Jangi reddy