06-11-2021 06:11 AM
I have recently purchased the zcu102 Board for my project. To get started, I decided to run a simple BIT in order to check if everything is okay. But, to my surprise, the BIT fails (see photo attached). I have followed the instructions on XTP435 first.
But after, I decided to run another test provided here : XTP428 and all tests passed, meaning there are no issues with the DDR4 (PS and PL side).
Note that I can run a simple hello world code with or without freertos.
06-11-2021 09:07 AM
There are no snapshots attached here.
Please share the snapshot and let us know which tests are failing.
06-20-2021 08:07 PM
Can you also share the BIT log to know why the tests are failing.
Meanwhile you can checkout the below suggestions-
Update the fpgaport0, fpgaport1 and fpgaport2 as per the COM port listed in the device manager.
2. Make sure that no other serial interfaces are opened that us com port (including tera term, ensure that only BIT is running).
3. Also make sure that the system language and region is set to English (US).
Perform the tests again and share the GUI snapshot and latest BIT log.