UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Scholar jg_bds
Scholar
778 Views
Registered: ‎02-01-2013

ZCU102 schematic clean-up

Jump to solution

This is confusing. If Xilinx plans on releasing schematics (for the 1.1 board, perhaps?), it might be a good time to clean this up:

2019-01-08_12-09-27.jpg

-Joe G.

 

1 Solution

Accepted Solutions
Moderator
Moderator
734 Views
Registered: ‎07-23-2015

Re: ZCU102 schematic clean-up

Jump to solution

@jg_bds Thank you for bringing this to our attention. Will have this captured internally so that if a new rev is designed, this typo will be cleaned up. 

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
3 Replies
Moderator
Moderator
735 Views
Registered: ‎07-23-2015

Re: ZCU102 schematic clean-up

Jump to solution

@jg_bds Thank you for bringing this to our attention. Will have this captured internally so that if a new rev is designed, this typo will be cleaned up. 

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
Scholar jg_bds
Scholar
692 Views
Registered: ‎02-01-2013

Re: ZCU102 schematic clean-up

Jump to solution

Fret not, ZCU102 Community: the wiring on the PCB is correct.  This is just a schematic mix-up.

-Joe G.

 

Moderator
Moderator
640 Views
Registered: ‎07-23-2015

Re: ZCU102 schematic clean-up

Jump to solution

@jg_bds Yes,  I did verify yesterday based on your feedback and noticed the PCB layout is fine. Below is the net connection

zcu102_protect.JPG

Just the schematic has the typo. Missed putting this up yesterday and thanks for clarifying as well. 

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------
0 Kudos