Solved: Re: ZCU102 schematic clean-up

jg_bds · ‎01-08-2019

This is confusing. If Xilinx plans on releasing schematics (for the 1.1 board, perhaps?), it might be a good time to clean this up:

-Joe G.

gnarahar · ‎01-09-2019

@jg_bds Thank you for bringing this to our attention. Will have this captured internally so that if a new rev is designed, this typo will be cleaned up.

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

gnarahar · ‎01-09-2019

@jg_bds Thank you for bringing this to our attention. Will have this captured internally so that if a new rev is designed, this typo will be cleaned up.

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------

View solution in original post

jg_bds · ‎01-09-2019

Fret not, ZCU102 Community: the wiring on the PCB is correct. This is just a schematic mix-up.

-Joe G.

gnarahar · ‎01-09-2019

@jg_bds Yes, I did verify yesterday based on your feedback and noticed the PCB layout is fine. Below is the net connection

Just the schematic has the typo. Missed putting this up yesterday and thanks for clarifying as well.

- Giri
--------------------------------------------------------------------------------------------------------------------
There's no such thing as a stupid question. Feel free to ask but do a quick search to make sure it ain't already answered.
Keep conversing, give Kudos and Accept Solution when you get one.
-----------------------------------------------------------------------------------------------------------------------