cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant
Participant
1,052 Views
Registered: ‎06-19-2018

ZCU104 HDMI OUT

Jump to solution

Hi,

In ZCU104 eval board, there is two HDMI connector. which connected through SN65DP159RGZ and TMDS181IRGZT. Can we use both as HDMI out (which is HDMI TX) ? Is there any possibility to configure both as HDMI TX?

Please advice..!!

 

 

Thanks,

Vignesh

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,020 Views
Registered: ‎04-12-2017

Re: ZCU104 HDMI OUT

Jump to solution

Hello @vignesh_econ,

 

Please refer page number 58 of UG1267.

hdmi.JPG

as per the direction of clocking we cannot use both ports or cannot be configured as HDMI TX.

 

Thank you

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

2 Replies
Highlighted
Moderator
Moderator
1,021 Views
Registered: ‎04-12-2017

Re: ZCU104 HDMI OUT

Jump to solution

Hello @vignesh_econ,

 

Please refer page number 58 of UG1267.

hdmi.JPG

as per the direction of clocking we cannot use both ports or cannot be configured as HDMI TX.

 

Thank you

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

Highlighted
Observer
Observer
824 Views
Registered: ‎12-04-2018

Re: ZCU104 HDMI OUT

Jump to solution

am sorry for the stupid question but i am a bit confused, are both of the port mapped to dedicated pin so that both of them can be used at the same time ?

0 Kudos