UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
943 Views
Registered: ‎09-17-2018

ZCU111 DAC/ADC signal levels

Jump to solution

I just started getting familiar with the ZCU111 board and I'm trying to figure out some information about the DAC/ADC interfaces:

What is the max DAC output current? (in UG1287 the introduction is saying 20 or 32mA, but I didn't see it mentioned later on)

What is the ADC input voltage range?

Are the DAC/ADC 50 ohm terminated?

Any advice on where I can find this information is greatly appreciated.

 

Thanks for your support in advance!

Tags (4)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
895 Views
Registered: ‎06-21-2018

Re: ZCU111 DAC/ADC signal levels

Jump to solution

Hi Tamas,

I believe you can find all that information in the DC and AC Datasheet:

https://www.xilinx.com/support/documentation/data_sheets/ds926-zynq-ultrascale-plus-rfsoc.pdf

Here is the link to the RFSoC Documentation page:

https://www.xilinx.com/products/silicon-devices/soc/rfsoc.html#documentation

Thanks,

Andres

 

 

2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
896 Views
Registered: ‎06-21-2018

Re: ZCU111 DAC/ADC signal levels

Jump to solution

Hi Tamas,

I believe you can find all that information in the DC and AC Datasheet:

https://www.xilinx.com/support/documentation/data_sheets/ds926-zynq-ultrascale-plus-rfsoc.pdf

Here is the link to the RFSoC Documentation page:

https://www.xilinx.com/products/silicon-devices/soc/rfsoc.html#documentation

Thanks,

Andres

 

 

871 Views
Registered: ‎09-17-2018

Re: ZCU111 DAC/ADC signal levels

Jump to solution

Many thanks Andres!

0 Kudos