cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
391 Views
Registered: ‎02-06-2020

Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

I am going through Zynq UltraScale+ MPSoC for the Hardware Designer courses from Xilinx Training Center. At the end of each course there is a lab. Each lab assumes to use prepared files for illustration. However there is no attached lab files, just a link to the guide. Am I missing something in how it is supposed to work? Are these lab files at the different directory I just don’t see?

1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
331 Views
Registered: ‎03-25-2019

Re: Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

Hi @ar2019,

You can find all the labs files in the following link:

     https://www.xilinx.com/training/downloads.html

For the "Zynq UltraScale+ MPSoC for the Hardware Designer", here it is the link:

     https://www.xilinx.com/training/downloads.html#embdzuphw

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post

6 Replies
Highlighted
Moderator
Moderator
332 Views
Registered: ‎03-25-2019

Re: Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

Hi @ar2019,

You can find all the labs files in the following link:

     https://www.xilinx.com/training/downloads.html

For the "Zynq UltraScale+ MPSoC for the Hardware Designer", here it is the link:

     https://www.xilinx.com/training/downloads.html#embdzuphw

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post

Highlighted
Contributor
Contributor
328 Views
Registered: ‎02-06-2020

Re: Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

Thank you. Perfect timing!

Highlighted
Moderator
Moderator
320 Views
Registered: ‎03-25-2019

Re: Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

You are welcome!

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
Highlighted
Contributor
Contributor
271 Views
Registered: ‎02-06-2020

Re: Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

I decided to add another question here since it is related to original topic. 

The Xilinx courses (Embedded Systems design as an example) talk about new tools (Vitis in SDK Drive course and it include lab). But all labs are till 2019.1 which is still SDK. Are there newer versions? 

0 Kudos
Highlighted
Moderator
Moderator
251 Views
Registered: ‎03-25-2019

Re: Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

Hi  @ar2019,

As there is no 2019.2 lab for the "Embedded Systems Design" in the provided link, so you won't find it else where.

If you are interested in a Vitis lab you may want to check "Migrating to the Vitis Embedded Software Development IDE Workshop".

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
Highlighted
Contributor
Contributor
216 Views
Registered: ‎02-06-2020

Re: Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution
That's too bad.
Thank you.
0 Kudos